Aerogel Insulation Film
Aerogel Insulation Film
Aerogel Insulation Film is based on aerogel water-based slurry and is a film-shaped nano-thermal insulation material prepared by fine coating technology on a variety of functional optional substrates.
Aerogel Insulation Film
Aerogel Insulation Film is based on aerogel water-based slurry and is a film-shaped nano-thermal insulation material prepared by fine coating technology on a variety of functional optional substrates. It aims to solve the thermal management problems of uniform heat and heat dissipation of precision industrial products in a small space, especially for weak heat-resistant components, which have a good heat insulation protection effect, improve the comfort of use of electronic products, and prolong the service life of electronic products.
Specifications
| Product Type | Aerogel Insulation Film |
| Thermal Conductivity | 0.018~0.025 W/(m·K) |
| Film Thickness | 100 um~500 um |
| Working Temperature | -40 ℃ ~ 120 ℃ |
| Dielectric Strength | ≥4kV/mm |
| Volume Resistivity | ≥1.0×1013 Ω×cm |
| Storage Conditions | Sealed and stored in a cool dry place |
Features
- Low thermal conductivity: The thermal insulation film has an extremely low thermal conductivity, which can be well applied in the fields of heat equalization and heat insulation of consumer electronics and medical equipment.
- Thin thickness: The coating thickness as low as 100 microns hardly affects the product dimensions, and can be applied to special positions in confined spaces.
- Easy to die-cut processing: use it in combination with heat dissipation film to get a better thermal solution.
- Excellent pure edge performance.
- RoHS compliant: no precious metals, no harmful chemicals.
Advantages
- Excellent thermal conductivity: The thermal conductivity is 0.020 W/m•K, which is 23% lower than the thermal conductivity of the air gap (0.026 W/m•K) at 25 ℃.
- Improve equipment performance: delay the time when the frequency needs to be reduced by reducing the surface heat of the equipment. The product design is thinner, replacing the original air gap with a thinner insulation film while maintaining product performance.
- Reduce the surface temperature: The surface temperature can be reduced by 1 to 7°C .(depending on the power and the thickness of the heat insulation film)
- Stable thermal conductivity: Compared with air, it has more stable thermal conductivity when the temperature changes.
- Easy integration: use with graphite or heat pipe solutions to optimize performance.
- Electrical insulating material: Provides a physical barrier without affecting the original electromagnetic compatibility and radio frequency design.
Storage Suggestions
- Keep all insulation products out of direct sunlight.
- Store insulated products in a clean, cool, dark place at approximately. 21°C (70°F) and relative humidity (RH) of approximately 50%.
- Maximum storage time is one year.